A-10C Front Panel

Layout matches as close to the real thing as I can get with my limited information and build materials. Spacing between cut outs is purposefully bigger then real to allow for more rigidity when cut out of 1/2" plywood.

Cut Out Dimensions From Notes
MFD's Custom Pocket is designed to fit AT080TN52v.1 8" LCD panel and should be 6.3mm deep.
HSI Custom Pocket is designed to fit AT050TN22v.1 8" LCD panel and should be 6.3mm deep.
RWR Custom Pocket is designed to fit PD035VX2 3.5" LCD panel and should be 3.45mm deep.
Altimeter Mil-Spec Cut out for real AAU-19, fit tested with real instrument.
VVI Mil-Spec Cut out for real AAU-9A, fit tested with real instrument.
Indicated Air Speed Mil-Spec Cut out for real AVU-22_A, fit not tested.
ADI Mil-Spec Cut out for real ARU-2/B ADI, fit tested with real instrument.
Landing Gear Panel Real Panel Measured from real landing gear panel, top left mounting hole could be slightly off.
AHCP Best Guess
AoA/Clock/UHF Repeater/Backup ADI Best Guess
Engine Gauges Best Guess
Fuel Panel Best Guess
CMSC Best Guess
NMSP Best Guess
Indicators Real Indicators Sized for real indicators plus 1/16th bracket on top and bottom of them.